MDT DRT Chassis system - REM 700 SA - RH - Black - 115750-BLK

Dead Right There. That's the only outcome you're hunting for tonight.

No wind. No distractions. Just the cold, dark night and the faint shape of a hog working the fence line two hundred yards out, its signature ghosting through your thermal. You've been sitting on this field for three hours, and your legs are stiff, but the rifle at your feet hasn't asked anything of you all night.

Get closer, and the ground turns to broken pasture and deadfall. A heavy rig punishes you here, every extra pound another reason to second-guess the stalk. The DRT doesn't. Magnesium construction keeps it light for the walk in, then locks down hard the second you settle into position. Fold it for the fence-line crossing. Drop into a tripod when the shot presents itself.

Behind the glass, the white heat washes in and everything else drops away. No noise. No stiff knees. Just the reticle and the shape moving through your scope. The DRT's NV bridge keeps your clip-on running true to that reticle, so the crosshair and the signature are always tracking on the same spot. There's no guessing here. You settle the shot, and you send it.

Dead Right There. Every time.

The full-length 20 MOA NV bridge keeps your clip-on locked in true alignment with your riflescope. A rigid forend and bridge system keep that alignment from wandering under pressure, so your sight picture stays clean and your zero stays consistent in the dark.

A heavy chassis wears on you long before the shot ever presents itself, and tired muscles mean an elevated heart rate, shakier hold, and a harder time settling the crosshair right when it counts. Magnesium construction holds the whole system to 3.2 lbs without giving up the strength you need behind the glass, so you're steady and settled when the moment finally comes, not gassed from the walk in.

Magnesium structure, an aluminum ARCA rail and NV bridge reinforce the forend against the flex that causes point of impact shift. Loaded on a bipod, braced on a tripod, or shooting off a bag, the zero holds.

A low bore axis design cuts the leverage that drives muzzle rise, keeping your sight picture stable through recoil. You stay in the glass, spot the impact, and get back on target fast for a follow-up.

A bolted-on ARCA rail, M-LOK mounting points, and offset Picatinny rail give your tripod, rangefinder, and IR laser their own dedicated space. Nothing fights for room when it's time to move fast.

Locks into your support bag without putting pressure on the magazine.

Covers the bolt handle when folded for a smaller footprint.

Compatible with both ARCALOCK (Area 419) and RRS Lock tripod/bipod interfaces.

MATERIAL / FINISH

• Magnesium (Chassis Body & Buttstock)
• Aluminum (NV Bridge & ARCA Rail)
• Titanium (LOP Pins, LOP Clamp, Action Screws)
• Carbon Fiber (Grip)

WEIGHT

• Chassis, Buttstock, NV Bridge, CF Grip: 3.2Lbs / 51.2oz
• NV Bridge Spacers: 0.08Lbs / 1.3oz
• NV Bridge: 0.37Lbs / 5.92oz
  Offset Pic Rail: 0.2Lbs / 3.2oz
• Thumbscrew: 0.02Lbs / 0.32oz

LENGTH OF PULL ADJUSTMENT (LOP)

• 2.25” LOP Adjustment
  MIN: 12” (305mm)
  MAX: 14.25” (362mm)
• 1.15” Cheekriser Height Adjustment

DIMENSIONS

• 33.7” x 1.99” x 7.33”

MAX BARREL DIAMETER

• Allows up to 1.25" straight contour Barrels (With included NV Bridge Spacer Kit)

FOREND LENGTH

• 24.52"
• From recoil lug: 14.93"

NV BRIDGE

• Muzzle diameter must be less than 1.1"
• Barrel length must be more than 15" to clear the end of the NV bridge
• Use a 20 MOA scope base/integrated rail
• Minimum recommended scope ring height: 1.5"
  
• For proper alignment, the height from the bottom of the action to the top of the scope base should be 1.67" - 1.87"

NV BRIDGE SPACERS

• For larger barrel diameters up to 1.25" straight MAX.
• Picatinny rail on the NV bridge will not be in-line with the scope base. Not recommended for NV/Thermal use.
• Higher scope rings than 1.5" may be required to clear the NV bridge -OR- a scope with a smaller objective lens diameter (1.700"+ height recommended)

RECOIL LUG POCKET

• Maximum recoil lug height: 0.375"